Iron Stocking Stand Assembly


  • Place all parts on a clean and smooth surface, such as a rug or carpet, to prevent the parts from being scratched.
  • Check to be sure you have all the parts and hardware
  • Remove all wrapping materials, including staples and packing straps, before you begin assembly.
  • Please take the time to read all instructions carefully.
  • Professional installation recommended
parts list
part 1

1. Please put the stands of the Stocking Holder on the ground.

2. Insert the top of the Stocking Holder into the stands on both sides.

3. Tighten the screws on both sides - see diagram below.

part 2

4. Place 6 hooks on the Stocking Holder top one by one.

5. Below is what the Stocking Holder should look like after assembly is finished.

part 3